Franklin International Titebond UA 920 Sealant 10.1 Oz White Urethane / Modified Acrylic Blend (Siliconized)
$4.32
Available for order: Call for lead time
SKU
TITE 8701
- Buy 5 for $4.10 each and save 5%
- Buy 10 for $3.89 each and save 10%
Titebond
Form | Mastic |
---|---|
Flash Point | None |
Service Temperature | -40°F to 180°F |
Application Temperature | Greater Than 40°F |
Applicators | Caulking Gun |
Total Work Time | 15 Minutes |
VOC | 18 g/L Non-reactive |
Substrate Preparation | Clean and Dry |
Cleaning Method | Soap and Water |
Limitations | Do not apply if rain is expected within 12 hours. Air, sealant and surface temperature should be above 40°F. Allow at least 2 hours of drying time before painting with acrylic or elastomeric coatings. If joint depth exceeds 1/4”, use backing material. Not designed for continuous submersion or use below the waterline. Do not use for aquariums. For questions, please call our Help Line at 1-800-347-4583. |
Caution | WARNING: EYE, SKIN AND RESPIRATORY IRRITANT. Contains acrylic polymer, limestone, titanium dioxide and ethylene glycol. Harmful if swallowed. Long term exposure to ingredients in this product can increase the risk of certain cancers. Adverse reproductive effects have been reported in animals. Avoid contact with eyes, skin and clothing. Use only with adequate ventilation. Wear appropriate personal protective equipment. First Aid: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush eyes with water for 15 minutes; contact physician. Wash skin contact areas with soap and water; contact physician if irritation persists. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN. WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. |
Packaging | 10.1 Oz |
Case Size | 12 |
Wet Color | White |
Dry Color | White |
Weight Per Gallon | 9.75 lbs |
Shelf Life | 24 Months |
Storage Temp | 50°F to 80°F |
Chemistry | Urethane / Modified Acrylic Blend (Siliconized) |
% Solids | 0.7 |
Coverage | 31 ft |
Freeze Thaw Stable | Yes |
Finishable | Yes |
Waterproof | Water Resistant |
Substrate | Most Common Building Materials |
Approvals and Testing | Exceeds requirements of ASTM C920 Grade NS Class 25 and ASTM C834 Type OP Grade -18°C Exceeds requirements of Federal specification TT-S-00230C Type II Class A No failures when tested in accordance with ASTM C1382 when used per ASTM C920 Class 25 Meets the performance requirements of AAMA 808.3 |
Sold As | 10.1 Oz |