-
Wind Soft-Close Door Lifting System for Small Doors by Salice - FRAKFEXWSN9
Specs (pdf)- The weight of the door must also be considered when selecting the correct lift system. Please refer to the charts system selection by weight and door dimension.
- * The Wind lift is supplied with an angle reduction clip installed, reducing the opening angle to 85 degrees.
- The reduction clip may be removed to achieve an opening angle of 94 degrees if the "K" boring distance on the door is 5mm or less.
- *Opening angle of 85 degrees.
- Maximum door thickness: 28mm (1-1/8").
- Minimum door thickness: 16mm (5/8").
- Top overlay possibility: From 16mm to 20mm.
- Edge bore distance on the door: 3.0mm to 7.0mm.
- Depth adjustment: -1.0mm, +3.0mm.
- Side adjustment: +2.0mm, -2.0mm.
- Height adjustment: +2.0mm, -2.0mm.
- Available with soft close or Push self open features.
Features $35.95 -
Wind Soft-Close Door Lifting System for Medium Small Doors by Salice - FRAKFEXDSN9
Specs (pdf)- The weight of the door must also be considered when selecting the correct lift system. Please refer to the charts system selection by weight and door dimension.
- * The Wind lift is supplied with an angle reduction clip installed, reducing the opening angle to 85 degrees.
- The reduction clip may be removed to achieve an opening angle of 94 degrees if the "K" boring distance on the door is 5mm or less.
- *Opening angle of 85 degrees.
- Maximum door thickness: 28mm (1-1/8").
- Minimum door thickness: 16mm (5/8").
- Top overlay possibility: From 16mm to 20mm.
- Edge bore distance on the door: 3.0mm to 7.0mm.
- Depth adjustment: -1.0mm, +3.0mm.
- Side adjustment: +2.0mm, -2.0mm.
- Height adjustment: +2.0mm, -2.0mm.
- Available with soft close or Push self open features.
Features $35.95 -
Wind Soft-Close Door Lifting System for Medium Large Doors by Salice - FRAKFEXFSN9
Specs (pdf)- The weight of the door must also be considered when selecting the correct lift system. Please refer to the charts system selection by weight and door dimension.
- * The Wind lift is supplied with an angle reduction clip installed, reducing the opening angle to 85 degrees.
- The reduction clip may be removed to achieve an opening angle of 94 degrees if the "K" boring distance on the door is 5mm or less.
- *Opening angle of 85 degrees.
- Maximum door thickness: 28mm (1-1/8").
- Minimum door thickness: 16mm (5/8").
- Top overlay possibility: From 16mm to 20mm.
- Edge bore distance on the door: 3.0mm to 7.0mm.
- Depth adjustment: -1.0mm, +3.0mm.
- Side adjustment: +2.0mm, -2.0mm.
- Height adjustment: +2.0mm, -2.0mm.
- Available with soft close or Push self open features.
Features $58.45 -
Wind Soft-Close Door Lifting System for Medium Doors by Salice - FRAKFEXISN9
Specs (pdf)- The weight of the door must also be considered when selecting the correct lift system. Please refer to the charts system selection by weight and door dimension.
- * The Wind lift is supplied with an angle reduction clip installed, reducing the opening angle to 85 degrees.
- The reduction clip may be removed to achieve an opening angle of 94 degrees if the "K" boring distance on the door is 5mm or less.
- *Opening angle of 85 degrees.
- Maximum door thickness: 28mm (1-1/8").
- Minimum door thickness: 16mm (5/8").
- Top overlay possibility: From 16mm to 20mm.
- Edge bore distance on the door: 3.0mm to 7.0mm.
- Depth adjustment: -1.0mm, +3.0mm.
- Side adjustment: +2.0mm, -2.0mm.
- Height adjustment: +2.0mm, -2.0mm.
- Available with soft close or Push self open features.
Features $58.45 -
Wind Soft-Close Door Lifting System for Large Doors by Salice - FRAKFEXSSN9
Specs (pdf)- The weight of the door must also be considered when selecting the correct lift system. Please refer to the charts system selection by weight and door dimension.
- * The Wind lift is supplied with an angle reduction clip installed, reducing the opening angle to 85 degrees.
- The reduction clip may be removed to achieve an opening angle of 94 degrees if the "K" boring distance on the door is 5mm or less.
- *Opening angle of 85 degrees.
- Maximum door thickness: 28mm (1-1/8").
- Minimum door thickness: 16mm (5/8").
- Top overlay possibility: From 16mm to 20mm.
- Edge bore distance on the door: 3.0mm to 7.0mm.
- Depth adjustment: -1.0mm, +3.0mm.
- Side adjustment: +2.0mm, -2.0mm.
- Height adjustment: +2.0mm, -2.0mm.
- Available with soft close or Push self open features.
Features $58.45 -
Wind Push to Open Door Lifting System for Small Doors by Salice - FRAKFEPWSN9
Specs (pdf)- The weight of the door must also be considered when selecting the correct lift system. Please refer to the charts system selection by weight and door dimension.
- * The Wind lift is supplied with an angle reduction clip installed, reducing the opening angle to 85 degrees.
- The reduction clip may be removed to achieve an opening angle of 94 degrees if the "K" boring distance on the door is 5mm or less.
- *Opening angle of 85 degrees.
- Maximum door thickness: 28mm (1-1/8").
- Minimum door thickness: 16mm (5/8").
- Top overlay possibility: From 16mm to 20mm.
- Edge bore distance on the door: 3.0mm to 7.0mm.
- Depth adjustment: -1.0mm, +3.0mm.
- Side adjustment: +2.0mm, -2.0mm.
- Height adjustment: +2.0mm, -2.0mm.
- Available with soft close or Push self open features.
Features $35.95 -
Wind Push to Open Door Lifting System for Medium Small Doors by Salice - FRAKFEPDSN9
Specs (pdf)- The weight of the door must also be considered when selecting the correct lift system. Please refer to the charts system selection by weight and door dimension.
- * The Wind lift is supplied with an angle reduction clip installed, reducing the opening angle to 85 degrees.
- The reduction clip may be removed to achieve an opening angle of 94 degrees if the "K" boring distance on the door is 5mm or less.
- *Opening angle of 85 degrees.
- Maximum door thickness: 28mm (1-1/8").
- Minimum door thickness: 16mm (5/8").
- Top overlay possibility: From 16mm to 20mm.
- Edge bore distance on the door: 3.0mm to 7.0mm.
- Depth adjustment: -1.0mm, +3.0mm.
- Side adjustment: +2.0mm, -2.0mm.
- Height adjustment: +2.0mm, -2.0mm.
- Available with soft close or Push self open features.
Features $35.95 -
Wind Push to Open Door Lifting System for Medium Large Doors by Salice - FRAKFEPFSN9
Specs (pdf)- The weight of the door must also be considered when selecting the correct lift system. Please refer to the charts system selection by weight and door dimension.
- * The Wind lift is supplied with an angle reduction clip installed, reducing the opening angle to 85 degrees.
- The reduction clip may be removed to achieve an opening angle of 94 degrees if the "K" boring distance on the door is 5mm or less.
- *Opening angle of 85 degrees.
- Maximum door thickness: 28mm (1-1/8").
- Minimum door thickness: 16mm (5/8").
- Top overlay possibility: From 16mm to 20mm.
- Edge bore distance on the door: 3.0mm to 7.0mm.
- Depth adjustment: -1.0mm, +3.0mm.
- Side adjustment: +2.0mm, -2.0mm.
- Height adjustment: +2.0mm, -2.0mm.
- Available with soft close or Push self open features.
Features $58.45 -
Wind Push to Open Door Lifting System for Medium Doors by Salice - FRAKFEPISN9
Specs (pdf)- The weight of the door must also be considered when selecting the correct lift system. Please refer to the charts system selection by weight and door dimension.
- * The Wind lift is supplied with an angle reduction clip installed, reducing the opening angle to 85 degrees.
- The reduction clip may be removed to achieve an opening angle of 94 degrees if the "K" boring distance on the door is 5mm or less.
- *Opening angle of 85 degrees.
- Maximum door thickness: 28mm (1-1/8").
- Minimum door thickness: 16mm (5/8").
- Top overlay possibility: From 16mm to 20mm.
- Edge bore distance on the door: 3.0mm to 7.0mm.
- Depth adjustment: -1.0mm, +3.0mm.
- Side adjustment: +2.0mm, -2.0mm.
- Height adjustment: +2.0mm, -2.0mm.
- Available with soft close or Push self open features.
Features $58.45 -
Wind Push to Open Door Lifting System for Large Doors by Salice - FRAKFEPSSN9
Specs (pdf)- The weight of the door must also be considered when selecting the correct lift system. Please refer to the charts system selection by weight and door dimension.
- * The Wind lift is supplied with an angle reduction clip installed, reducing the opening angle to 85 degrees.
- The reduction clip may be removed to achieve an opening angle of 94 degrees if the "K" boring distance on the door is 5mm or less.
- *Opening angle of 85 degrees.
- Maximum door thickness: 28mm (1-1/8").
- Minimum door thickness: 16mm (5/8").
- Top overlay possibility: From 16mm to 20mm.
- Edge bore distance on the door: 3.0mm to 7.0mm.
- Depth adjustment: -1.0mm, +3.0mm.
- Side adjustment: +2.0mm, -2.0mm.
- Height adjustment: +2.0mm, -2.0mm.
- Available with soft close or Push self open features.
Features $58.45
Welcome to Westlund Distributing - Wholesale Cabinetry Supplies and Tools
Account